Products
Find Your Product
Marathon offers over 100 different asphalt related products across its 27 locations. We can also formulate other asphalt and emulsion products to fit your needs.
To obtain SDS/ Data Sheets visit the marathonpetroleum.com corporate website
| Product | Description |
|---|---|
| 0-10 Pen Specialty Product, Binder, Roofing |
0-10 Pen is produced from SDA (Solvent Deasphalting). These SDA Bottoms are asphaltene rich resulting in typical properties of high softening point (212F+) and low penetration (typically 0 dmm) depending on the operating severity of the SDA unit. This product has many applications including roofing, emulsions and blending. |
| 150-200 Pen Specialty Product, Binder, Roofing |
150-200 Pen is a high penetration range asphalt, typically also meeting requirements of an AC-5, approximately 500P viscosity material. This asphalt product is used as an emulsion base, in roofing applications and in blending of other PG asphalts. |
| AC-20 Cement Specialty Product, Binder, Roofing |
AC-20 is unmodified asphalt product, approximately 2000P viscosity, used for hot mix asphalt, emulsion production or further modification for higher temperature paving grades. |
| AC-30 Cement Specialty Product, Binder, Roofing |
AC-30 is unmodified asphalt product, approximately 3000P viscosity used for hot mix asphalt, emulsion production or further modification for higher temperature paving grades. |
| AC-5 Cement Specialty Product, Binder |
AC-5, approximately 500P viscosity material, is a high penetration range asphalt, typically also meeting requirements of a 150-200 dmm pen. This asphalt product is used as an emulsion base and in blending of other PG asphalts. |
| AC-7 Cement Specialty Product, Binder |
AC-7 is an asphalt blended to meet 700P viscosity and 100-160 dmm penetration. |
| AE-150 Emulsion Emulsion, Anionic |
AE-150 is an anionic, medium setting, high float emulsion. This emulsion is used in cold plant mix, mixed in place and less frequently chip sealing. |
| AE-200 Emulsion Emulsion, Anionic |
AE-200 is an anionic, medium setting, high float emulsion with a soft penetration base. Along with AE-150 and AE-300, this emulsion is used in cold plant mix and mixed in place. In addition, AE-200 and AE-300 can be used in stockpile mixing. |
| AE-3 Emulsion Emulsion, Anionic |
AE-3 is an anionic, medium setting, high float emulsion with a very soft penetration base. This emulsion is used in cold plant mix and mixed in place. |
| AE-300 Emulsion Emulsion, Anionic |
AE-300 is an anionic, medium setting, high float emulsion with a very soft penetration base. Along with AE-150 and AE-200, this emulsion is used in cold plant mix and mixed in place. In addition, AE-200 and AE-300 can be used in stockpile mixing. |
| AE-90 Emulsion Emulsion, Anionic |
AE-90 is an anionic, medium setting, high float emulsion. This emulsion is used in chip seals and less frequently, hot and cold pant mix. |
| AE-P Emulsion Emulsion, Anionic |
AE-P is an anionic, medium setting very soft base penetration emulsion. This emulsion is used as a prime to penetrate surfaces before another treatment. |
| CQS-1h (1:1) Dilute Emulsion Emulsion, Cationic |
Quick setting emulsions are designed for slurry and micro surfacing applications. Slurry materials are placed at the thickness of the aggregate and designed for a quick return to traffic. Micro surfacing emulsions can be placed at greater thickness than a slurry emulsion. Some slurry emulsions are Polymer Modified, while all micro surfacing emulsions are Polymer Modified. A micro-surfaced surface is typically opened to traffic in one hour or less, sometimes in less than 15 minutes. |
| CRS-2 Emulsion Emulsion, Cationic |
A rapid setting emulsion designed to react quickly with aggregate. These emulsions are primarily used as chip seals and are spray applied with the chip (aggregate) applied immediately after spraying. Polymer Modified versions are used to improve chip retention and higher traffic areas. |
| CRS-2P Emulsion Emulsion, Cationic |
A rapid setting emulsion designed to react quickly with aggregate. These emulsions are primarily used as chip seals and are spray applied with the chip (aggregate) applied immediately after spraying. Polymer Modified versions are used to improve chip retention and higher traffic areas. |
| CSS Emulsion Emulsion, Cationic |
CSS-1 is a cationic, low viscosity, hard penetration emulsion typically used for tack coats, prime coats and fog seals. The product has also seen use in mixing grades when dense graded aggregates are used. |
| EA-150 Emulsion Emulsion, Anionic |
EA-150 is an anionic, medium setting, high float emulsion. This emulsion is used in cold plant mix, mixed in place and less frequently chip sealing. |
| EA-300 Emulsion Emulsion, Anionic |
EA-300 is an anionic, medium setting, high float emulsion with a very soft penetration base. Along with EA-150, this emulsion is used in cold plant mix and mixed in place. In addition, EA-300 can be used in stockpile mixing. |
| HFE-150 Emulsion Emulsion, Anionic |
HFE-150 is an anionic, medium setting, high float emulsion. This emulsion is used in cold plant mix, mixed in place and less frequently chip sealing. |
| HFE-300 Emulsion Emulsion, Anionic |
HFE-300 is an anionic, medium setting, high float emulsion with a very soft penetration base. Along with HFE-150, this emulsion is used in cold plant mix and mixed in place. In addition, HFE-300 can be used in stockpile mixing. |
| HFMS-2 Emulsion Emulsion, Anionic |
HFMS-2 is an anionic, medium setting, high float emulsion. This emulsion is used in chip sealing and plant mixing. |
| HFRS-2 Emulsion Emulsion, Anionic |
HFRS-2 is an anionic, rapid setting, high float emulsion. This emulsion is used in chip sealing. |
| HP-2 Bio Cutback Specialty Product, Cutback |
HP-2 BIO is a high performance cold mix binder for use in the most demanding asphalt or concrete pavement maintenance or pothole patching applications. US Patent Number 6,764,542. |
| HP-20 Specialty Product, Binder |
HP-20 is a hard pen asphalt base used in asphalt blending and emulsion production. |
| KP-6 Cutback Specialty Product, Cutback |
KP-6 is a cutback asphalt formulated with petroleum distillates to decrease viscosity and improve coating. KP-6 is used in stockpile mixes for paving and patching. |
| LMCQS-1h (NV) Emulsion Emulsion, Cationic |
Quick setting emulsions are designed for slurry and micro surfacing applications. Slurry materials are placed at the thickness of the aggregate and designed for a quick return to traffic. Micro surfacing emulsions can be placed at greater thickness than a slurry emulsion. Some slurry emulsions are Polymer Modified, while all micro surfacing emulsions are Polymer Modified. A micro-surfaced surface is typically opened to traffic in one hour or less, sometimes in less than 15 minutes. |
| LMCQS-1h Emulsion Emulsion, Cationic |
Quick setting emulsions are designed for slurry and micro surfacing applications. Slurry materials are placed at the thickness of the aggregate and designed for a quick return to traffic. Micro surfacing emulsions can be placed at greater thickness than a slurry emulsion. Some slurry emulsions are Polymer Modified, while all micro surfacing emulsions are Polymer Modified. A micro-surfaced surface is typically opened to traffic in one hour or less, sometimes in less than 15 minutes. |
| MC-250 Cutback Specialty Product, Cutback |
MC-250 is a moderately volatile, medium curing, medium viscosity cutback asphalt used, in general, for mixing surface treatments or chip sealing. |
| MC-30 Cutback Specialty Product, Cutback |
MC-30 is a moderately volatile, medium curing, low viscosity cutback asphalt used, in general, for priming and as a dust suppressant. |
| MC-3000 Cutback Specialty Product, Cutback |
MC-3000 is a moderately volatile, medium curing, high viscosity cutback asphalt used, in general, for mixing surface treatments or chip sealing. |
| MC-70 Cutback Specialty Product, Cutback |
MC-70 is a moderately volatile, medium curing, low viscosity cutback asphalt used, in general, for priming and as a dust suppressant. |
| MC-800 Cutback Specialty Product, Cutback |
MC-800 is a moderately volatile, medium curing, medium viscosity cutback asphalt used, in general, for mixing surface treatments or chip sealing. |
| MWS-90 Emulsion Specialty Product, Cutback |
MWS-90 is an anionic, medium setting, high float emulsion. This emulsion is used in chip sealing and plant mixing. |
| NTT (No Track Tack) Specialty Product, Binder |
NTT (No Track Tack) is an anionic, hard penetration grade emulsion used for tack coat. This tack coat as specially formulated to break quickly. |
| PEP Emulsion Emulsion, Anionic |
PEP is an anionic, medium setting very soft base penetration emulsion. This emulsion is used as a prime to penetrate surfaces before another treatment. |
| PG 46-28 Paving Grades, Non Modified |
PG46-28 is a 150-200 penetration asphalt product with typical viscosity around 200-300 Poise. PG46-28 can be used in asphalt blending, as a hot applied chip seal product or as hot mix binder for high recycle mixtures and very cold climates. |
| PG 52-28 Paving Grades, Non Modified |
PG52-28 is a 150-200 dmm penetration asphalt product with typical viscosity around 500 Poise. PG52-28 can be used in asphalt blending, as an emulsion base for manufacturing or as hot mix binder for high recycle mixtures and very cold climates. |
| PG 58-22 Paving Grades, Non Modified |
PG58-22 is unmodified asphalt product used for hot mix asphalt, emulsion production or further modification for higher temperature paving grades. |
| PG 58-28 Paving Grades, Non Modified, Roofing |
PG58-28 is an unmodified asphalt product used for hot mix asphalt, roofing applications or emulsion production. |
| PG 58-34 Paving Grades |
PG 58-34 is an asphalt cement used in hot mix asphalt production. |
| PG 58-34PM Paving Grades, Polymer Modified |
PG58-34PM is a Polymer Modified asphalt product used in hot mix asphalt production where high levels of RAP are incorporated. |
| PG 64-16 Paving Grades, Non Modified |
PG64-16 is an unmodified asphalt product used for hot mix asphalt, emulsion production or further modification for higher temperature paving grades. |
| PG 64-22 Paving Grades, Non Modified, Roofing |
PG64-22 is an unmodified asphalt product used for hot mix asphalt, emulsion, roofing applications or further modification for higher temperature paving grades. |
| PG 64-28 Paving Grades, Non Modified |
PG64-28 is a modified asphalt product used for hot mix asphalt, emulsion production or further modification for higher temperature paving grades. |
| PG 64-28M Paving Grades, Polymer Modified |
PG 64-28M is a Polymer Modified asphalt product used in hot mix asphalt production. |
| PG 64-28NV Paving Grades, Polymer Modified |
PG64-28NV is a Polymer Modified asphalt product used for hot mix asphalt, emulsion production or further modification for higher temperature paving grades. |
| PG 64-28P Paving Grades, Non Modified |
PG64-28P is a modified asphalt product used for hot mix asphalt, emulsion production or further modification for higher temperature paving grades. |
| PG 64-28PM Paving Grades, Polymer Modified |
PG64-28PM is a Polymer Modified asphalt product used for hot mix asphalt, emulsion production or further modification for higher temperature paving grades. |
| PG 67-22 Paving Grades, Non Modified, Roofing |
PG67-22 is unmodified asphalt product used for hot mix asphalt, roofing applications, emulsion production or further modification for higher temperature paving grades. |
| PG 70-10 Paving Grades, Non Modified |
PG70-10 is unmodified asphalt product used for hot mix asphalt, emulsion production or further modification for higher temperature paving grades. |
| PG 70-16 Paving Grades, Non Modified |
PG70-10 is unmodified asphalt product used for hot mix asphalt, emulsion production or further modification for higher temperature paving grades. |
| PG 70-22 Paving Grades, Non Modified |
PG70-22 is a modified asphalt product used for hot mix asphalt or further modification for higher temperature paving grades. |
| PG 70-22M Paving Grades, Polymer Modified |
PG 70-22M is a Polymer Modified asphalt product used in hot mix asphalt production. |
| PG 70-22P Paving Grades, Non Modified |
PG70-22P is a Polymer Modified asphalt product used for hot mix asphalt or further modification for higher temperature paving grades. |
| PG 70-22PM Paving Grades, Polymer Modified, Roofing |
PG70-22PM is a Polymer Modified asphalt product used for hot mix asphalt or further modification for higher temperature paving grades. |
| PG 70-28 Paving Grades |
PG 70-28 is an asphalt cement used in hot mix asphalt production. |
| PG 70-28M Paving Grades, Polymer Modified |
PG 70-28M is a Polymer Modified asphalt product used in hot mix asphalt production. |
| PG 70-28P Paving Grades, Polymer Modified |
PG70-28P is a Polymer Modified asphalt product used for hot mix asphalt or further modification for higher temperature paving grades. |
| PG 70-28PM Paving Grades, Polymer Modified |
PG70-28PM is a Polymer Modified asphalt product used for hot mix asphalt or further modification for higher temperature paving grades. |
| PG 76-16 Paving Grades, Polymer Modified |
PG76-16 is a Polymer Modified asphalt product used for hot mix asphalt. |
| PG 76-22 Paving Grades, Non Modified |
PG76-22 is a modified asphalt product used for hot mix asphalt. |
| PG 76-22M Paving Grades, Polymer Modified |
PG 76-22M is a Polymer Modified asphalt product used in hot mix asphalt production. |
| PG 76-22NV Paving Grades, Polymer Modified |
PG76-22NV is a Polymer Modified asphalt product used for hot mix asphalt. |
| PG 76-22P Paving Grades, Polymer Modified |
PG76-22P is a Polymer Modified asphalt product used for hot mix asphalt. |
| PG 76-22PM Paving Grades, Polymer Modified, Roofing |
PG76-22PM is a Polymer Modified asphalt product used for hot mix asphalt. |
| PG 76-28PM Paving Grades, Polymer Modified, Specialty Product |
PG76-28PM is a Polymer Modified asphalt product used for hot mix asphalt. |
| PG 82-22PM Paving Grades, Polymer Modified |
PG82-22PM is a Polymer Modified asphalt product used for hot mix asphalt. |
| PMCQS-1h Emulsion Emulsion, Cationic |
Quick setting emulsions are designed for slurry and micro surfacing applications. Slurry materials are placed at the thickness of the aggregate and designed for a quick return to traffic. Micro surfacing emulsions can be placed at greater thickness than a slurry emulsion. Some slurry emulsions are Polymer Modified, while all micro surfacing emulsions are Polymer Modified. A micro-surfaced surface is typically opened to traffic in one hour or less, sometimes in less than 15 minutes. |
| QSH Emulsion Emulsion, Anionic |
QSH emulsion is used for mixing grade products. |
| Roofing Flux Roofing |
Low viscosity asphalt, typically utilized in production of roofing shingles, rolled roofing, or paving grade emulsions. |
| RS-2 Emulsion Emulsion, Anionic |
RS-2 is an anionic, rapid setting emulsion used in chip sealing. |
| RTE (MSE) Emulsion Emulsion, Cationic |
Quick setting emulsions are designed for slurry and micro surfacing applications. Slurry materials are placed at the thickness of the aggregate and designed for a quick return to traffic. Micro surfacing emulsions can be placed at greater thickness than a slurry emulsion. Some slurry emulsions are Polymer Modified, while all micro surfacing emulsions are Polymer Modified. A micro-surfaced surface is typically opened to traffic in one hour or less, sometimes in less than 15 minutes. |
| S-180 Hard Pen Emulsion, Anionic |
S-180 hard pen asphalt is blended product using 0-10 pen. The finished product is used in asphalt blending and emulsion production. |
| SC-250 Cutback Specialty Product, Cutback |
SC-250 is a low volatile, slow curing, medium viscosity cutback asphalt used, in general, for mixing surface treatments or chip sealing. |
| SC-3000 Cutback Specialty Product, Cutback |
SC-3000 is a low volatile, slow curing, high viscosity cutback asphalt used, in general, for mixing surface treatments or chip sealing. |
| SC-70 Cutback Specialty Product, Cutback |
SC-70 is a moderately volatile, medium curing, low viscosity cutback asphalt used, in general, for priming and as a dust suppressant. |
| SC-800 Cutback Specialty Product, Cutback |
SC-800 is a low volatile, medium curing, medium viscosity cutback asphalt used, in general, for mixing surface treatments or chip sealing. |
| SS-1 Emulsion Emulsion, Anionic |
SS-1 is an anionic, low viscosity, soft penetration emulsion typically used for tack coats, prime coats and fog seals. The product has also seen use in mixing grades when dense graded aggregates are used. |
| SS-1 Emulsion Diluted 30% Emulsion, Anionic |
SS-1H Dilute Emulsion is an anionic, low viscosity, hard penetration emulsion typically used for tack coats, prime coats and fog seals. The product has also seen use in mixing grades when dense graded aggregates are used. |
| SS-1H (1:1) Dilute Emulsion Emulsion, Anionic |
SS-1H (1:1) Dilute Emulsion is an anionic, low viscosity, hard penetration emulsion typically used for tack coats, prime coats and fog seals. The product has also seen use in mixing grades when dense graded aggregates are used. |
| SS-1H Emulsion Emulsion, Anionic |
SS-1H is an anionic, low viscosity, hard penetration emulsion typically used for tack coats, prime coats and fog seals. The product has also seen use in mixing grades when dense graded aggregates are used. |
To obtain SDS/ Data Sheets visit the marathonpetroleum.com corporate website